Tested and playing well. Runs of 100v power supply. It does not have the original power cable but DIY cable is within the set. It has an original stylus maintenance kit. SPECS: Drive system: Belt drive system Motors: DC servo motor Number of revolutions: 33-1/3, 45 rpm Rotation speed fine adjustment range: ±6% of specified speed [Turntable platter] Diameter: 31cm Material: Aluminum die cast Weight: 1.5kg Uneven rotation: 0.05% or less S / N ratio: 55dB or more [Tonearm part] Type: Static Balance Type (MA-202) Effective length: 237 mm Overhang: 15mm Offset angle: 21° 50’ Maximum tracking error: 1.5° Applicable cartridge weight: 4g to 16g When using the optional sub weight: 10g to 22g Variable needle pressure range: 0 to 3g [Cartridge section] Type: MM (M-7000 / 5) Frequency characteristic range: 5Hz to 40kHz, 5Hz to 50kHz (V-7000 / F) Output balance: ±0.5dB (1kHz) Channel separation: 30dB (1kHz) Output voltage: 3.5mV (1kHz, 3.54cm / s) Load resistance: 47kΩ to 50kΩ Optimal needle pressure: 1.5g Needle point: 0.5 mil diamond needle Compliance: 30 x 10-6cm / Dyne Weight: 5g Replacement needle: V-7000 / 5 (¥ 5,300) V-7000 / e (¥ 7, 100) V-7000 / F (For CD-4, ¥ 11,000) Power supply: AC 100V, 50 / 60Hz Power consumption: 13W Dimensions (W x H x D): 500 x 170 x 383mm Weight: 10kg (Net) #JapanWeek